Product Categories
News Center
Talk about how to use hydraulic vertical jacks

The hydraulic vertical jack is one of the jacks, so how to use this hydraulic vertical jack?

The first step: It is necessary to check whether the parts of each part are normal before use.

Step 2: Please refer to the instruction manual for the electric pump station to find out in detail.

Step 3: If the oil volume of the manual pump body is insufficient, it is necessary to add N32# hydraulic oil to the pump before it can work normally.

Step 4: When using, be sure to strictly abide by the parameters in its regulations.

Step 5: After the jack will be lifted, it is necessary to support the heavy objects in a timely manner.

Step 6: If you need to lift several jacks because of the need, in addition to correctly placing the jacks, you should also pay attention to the use of multi-top diverter valves, and the load of each jack should be balanced, pay attention to keep the lifting speed synchronous. .

Step 7: The center of gravity should be moderately selected, and the focus of the jack should be chosen reasonably.

Step 8: When using, first connect the quick connector of the manual pump to the top, then select the position and screw the oil drain screw on the oil pump to work.

Step 9: When the lifting work is completed, it can be quickly removed, but the connected hose cannot be used to pull the jack. This must be remembered.

Step 10: When using it, do not exceed its rated stroke and load to offset, otherwise it will easily damage the jack.

Step 11: If vibration occurs during use, be sure to avoid vibrations as much as possible.

Step 12: Do not use in the workplace of acid and alkali, corrosive gases.

Step 13: This is also the last step, after using up the jack.

Be sure to check it regularly. This is a question of a responsible attitude towards the safety of others and the safety of their property.

Copyright © 2019 Jiaxing Hongguang Machinery Co., Ltd. 浙ICP备13036442号